Tel:0086-13373880761
E-mail:michelle@soulikwinch.com
How to install the winch
Published:
2023-03-16 16:17
Source:
The use of the winch must, of course, begin with installation. Although it is not complicated, it is the most important step, because it is directly related to the subsequent steps and the use effect of the winch. The most important thing is to pay attention to the condition of the winch drum and ensure that the winch is evenly wound before starting and throughout the use process. The specific installation process is as follows:
(1) Insert the remote control. Insert the remote control cable end into the winch.
(2) Do not let the remote control cable hang. The driver can operate the remote control on the driver's seat and wrap the redundant wiring around the side rear-view mirror. It will be much easier to work.
(3) Open the winch, use the remote control to release the winch a little, and then open the winch hook installed on the side of the winch.
(4) Open the clutch. Note that the hook must be opened before opening the clutch.
(5) Hold the noose hook with your hand. When pulling the rope from the drum, hold the hook with one hand. No matter how long you pull the rope, you can't reach the hook.
(6) After pulling the winch to the fulcrum, lock the clutch. The winch is ready.
Related recommendations
Introduction to the structure of the winch
(1) Relay transmission. The relay transmission receives signals from the remote control, and its interior is a complete circuit that can change the direction of the motor. (2) Motor. There is a DC motor in this component. There is a cooling fan in the winch model to prevent overheating of the winch.
Special precautions for purchasing winch
(1) Don't expect small tension winch overload rescue Some car owners may choose cheaper vehicles that do not have enough traction for their own vehicles due to reasons such as not wanting to modify or not having enough budget The winch will handle it... never! Overloading the winch is very dangerous!
